How to Remove a Bathtub without Damaging Tiles

How to Remove a Bathtub without Damaging Tiles

Remove Bathtub Without Damaging Surroundings

Removing bathtub tile, especially one made of cast iron bathtubs, can be a dirty job. A cast-iron bathtub with such an overhanging front stands back on the ground, with tile backsplash leaving the entire and side corners.

That both tub and the tiles must be removed in order to repair the tub with a surrounding unit. Because of the huge weight of the cast iron bathtub, this is a challenging process that should be done by at least two individuals.

Standard tubs are permanently mounted with limited patience, and now the only method to uninstall these is to remove the tile around them. Another option for dealing with these excellent adhesions is to saw the tub in half or at the very least build a portion in the middle that can still be withdrawn to allow the tub to come out more easily. With a hatchet, old ceramic tubs may be dismantled and carted away in pieces.

Tubs feature a rim that extends beneath the tile, preventing water from flowing immediately into other walls. As a result, many tile outlines are unsalvageable when the tub is removed. If the tile would be to be protected, Homemade bathtub cleaning becomes an alternative. You can choose between expert refinishing and then do refurbishing kits whenever it comes to bathtub restoration.

Cast iron bathtubs can potentially weigh more than 300 pounds, depending on the location, form, and thickness of the walls, making them extremely impossible to clean. Depending on your intentions for the tub, you have a few options for removing it. I’ve used both approaches before, so I can assist you ready about what you’re about to experience.

You must disconnect any piping leading to the tub, regardless of the technique you choose among the options below. This typically involves removing the tub’s drainage, garbage, and overload lines. According to all the tub’s weight, these are often the only thing that is keeping it in place.

However, removing a tub is not as straightforward. So, how would you get rid of the old tub without damaging the tiles? For the beginning, avoid utilizing any industrial loads or exerting tensile stress on the tub.

To avoid scratching and measuring, take steps to protect the tile too though. It’s also nice if you could get the tub out throughout the toilet door without damaging it.

tub drain remover

To remove the bottom drainage from the tub’s piping underneath, a specialized instrument called a “Tub Drain Remover” is somewhat necessary. If my recollection memory serves me correctly, I used a large needle to slide it into the slot on the top section of the tub drainage, then unhooked the drain strainer horizontally. It’s much easier with the tool to remove drain from the tub, which you can get for $10.

Two Phillips head screws are normally used to unscrew the tub overflow component, which is buried inside of the tub.

Okay, now that the equipment from the tub has been correctly detached, you can switch off your drinking water as a protection, in case you accidentally damage a gas line during the bathtub extraction process.

There are some steps for removing a cast iron bathtub without damaging tiles:

  1. Measure

Begin by estimating the old tub’s diameter, length, and height. To eliminate any potential complications, keep in mind you acquire the largest points possible. Then, from floor to ceiling, examine the sliding door. For easy cleaning, it’s critical that your specifications are precise.

The goal here is to determine if the old tub can be withdrawn without breaking. It can be difficult to dismantle the old tub. For starters, the cleaning will be far more extensive. For one thing, the pieces may cause harm to the tiles on your shower floor. So, while you do anything about it, see if you can get your previous tub out in one piece.

  1. Taking Down the Door

If your measures don’t work, you may have no choice but to remove the door. If the tub is just too big to fit, detach the cover first from springs with a hammer. Make sure the door is positioned out the offside so it does not fall mostly during the transferring procedure.

Before proceeding forward, make sure the doorframe’s springs are closed. Also, make absolutely sure there are no protruding fasteners because they can cause a lot of pain if you get hooked on them. The tub may still be accessed through the door.

  1. Obstacles Removed

Any possible roadblocks must be addressed. In compact demolish a bathroom, relocating the toilet to make place for the tub may be necessary. It’s tough and risky to maneuver while lugging the tub, so make things easier on oneself.

  1. Cover Tiles

Cover your toilet tile with a covering of cardboard. Cover the paper with a layer of plastic sheeting once it has been laid out properly. Tape on all of the sharp edges just so the container doesn’t at all wobble or keep coming up while disassembly.

  1. Turning Off the Water Supply

Make sure the water supply to the cast iron bathtub is turned off before beginning the deportation process. Remove the power supply to your bathtub’s shipments. To allow the water from your bathroom, open the drain. With a towel, wipe away any residual water.

  1. Plumbing Fixtures Should Be Disconnected

With a curved tool and tub equipment, extract the cabling connected to the bathtub, along with the fixtures, taps, drain lever, showering diverter, and water valves. You’ll need to take a thorough look there under the tub at about this stage to examine the drainage catch.

  1. Break the Frame of the Bathtub

Remove the sealant and the very first panels of tiles which enclose the tub with a pry bar. Crack open the walls with a broom handle until the bolts are revealed.

  1. Keep the Bathtub Safe

A dropping cloth, a massive cloth, or a tarp can be used to protect the tub. During the work environment, this will safeguard the tub as well as its surroundings from being hit or harmed by any falling character particles.

  1. Cast-Iron Dismantling

Both with hands, take a firm grip on the blow blade’s handle and bash the tool to remove drain from tub hard against the central area of the tub’s outer surface. A large piece of the character will be split away as a result of this action. To break the tub apart, keep whipping it with the pipe wrench in the center of the window frame.

  1. Breaking Down in the Tub

Slam the tub’s bottom at the new spot, which is roughly a foot away from the drain. Clear the location of any damaged cast-iron parts to allow adequate room to focus on making into the tub’s internal component, which is next to the wall. Made landfall once more.

  1. Getting Rid of Cast Iron Pieces

Keep cracking the tub until it is disassembled into around four halves. It will be simple to remove the cast iron bathtub out from the washroom once this is completed.

Removing a Cast Iron Tub

At this stage, you should also have unplugged everything from the tub; now you must separate the bath first from walls, assuming that is how it was placed. You’ll do whatever is necessary to get rid of it, which may include replacing issue management and other obstructions that are keeping the tub in position.

If you removing a cast-iron tube and also removing a bathtub still can’t shift, you may need to destroy the walls that keep it in place. If you want to adopt a new tub in that region, I would recommend breaking even less of it as feasible

Remove the adjacent tile and take the building operational off 6″ above the tub to give oneself more than enough flexibility to push the tub off its hollow.

It is possible to remove or repurpose an old metal tub, but due to the tub’s immense scale, you will want considerable manpower. We had to carefully transport a wrought iron tub through the hall and dining, then down the two steps at a time, during one of our first total house restorations in 2005. That elimination stands up in my mind since it was so unexpected.

If you have to carry your tub down a staircase, I suggest having at least two manly leaders at the base, as the pressure is too great for one man to bear alone.

You risk damage to the steps and any carpeting you may drop or pull the tub on if you use this method. Also, on your journey out of the apartment, you may scratch or bump against walls, doorways, and some other obstructions, so strategize and are cautious.

Dismantle the Cast Iron Bathtub

This procedure has been utilized three times: twice on the job for repeat employees but once on my own. First, double-check that you’ve completed the previous steps concerning the piping connection. To risk serious damage from blocking your rain gutters, put some scrunched paper magazines into the uncovered tub drain, as I did.

By draping a sheet or old bedspread over the sections I planned to hammer, I was sufficient to delete both casting iron tubs. Why are you using the blanket? The ceramic coating will crumble into little jagged fragments that can injure you whenever they come into contact with your body.


How to cut a cast iron pipe?

  • Draw cut lines on the pipe with chalk. Align the markings on the pipes as stable as possible.
  • Coil the snap cutting chain as equally as possible and around the pipe. As many slicing wheels as can be pressed against the tube.
  • Press down on the cutter’s knobs to make the wheels cut through the tube. Before you really make the big cut, users may also have to score the tube numerous times.
  • If you’re cutting a substitute tube here on earth, you may also need to spin the pipe considerably before preparing the actual cut.

How much does a cast iron tub weigh?

Bathtubs made of cast iron normally weigh approximately 240 and 500 pounds, though the exact weights vary based on the size and kind of bathtub. The normal freestanding reinforced concrete bathtubs are 60 inches long, hold 32 mm of gasoline, and weigh 320 pounds.

How to refinish a cast iron tub?

We drink a glass with an acidic medium from the inside, which gives the existing porcelain a facelift. It will be used to wash the ceramic. In addition to giving a molar an appearance.

How to remove the old tub drain?

As to whether there is a predefined just under the drain stoppage, remove the handle also on top. If your outflow damper has a plan, detach it using a tiny screwdriver or hex key. Turn the stopper backward until it comes free of the attachment post. Utilizing pliers, detach the attachment post.

If your tub drainage isn’t working properly, it may need to be removed and cleaned, or replaced. You can absolutely guarantee that you’ve had the drain around and be on your way to achieving your tub problem in just a few basic steps.

How do cast saws work?

A sharp, slight blade swings backward and forth fast in a cast saw. The cast saw will cut through the substance against the flat substrate of both the stucco and fiberglass. The cast cutter, on the other hand, does not cut into your skin; it merely pushes it back and forth between the oscillations.

How to disconnect the bathtub drain? 

A pair of bullet lockable tweezers is the finest substitute for a plug socket. To reach further into drainage but through the cross, the forceps must be small enough. Once holding pliers are in place, crank the holding pliers to release the drain with a set of regular pliers.

Tub drains are notoriously difficult to unclog, owing to rust, sludge, or solidified builder’s cement. Heat aids in the removal of an old mechanic’s putty. If the bathtub is really cold, use a sandblaster or an air conditioner to slowly warm the cement for another few moments before replacing the drainage.

Leave a Comment